Full Automatic Plastic Bottle Carbonated Cola Drink Filling Machine
1.Description of Carbonated Drink Filling Machine
The bottle is filled with a gas-filled beverage bottle and is sent to the three-in-one filling machine by means of a whip wheel. The bottle is equipped with a bottle holder, up. The cleaned bottle is drawn from the bottle and is conveyed to the filling machine by means of a bottle stopper, and the bottle entering the filling machine is held by the bottleneck tray and the bottle is fed into the filling machine. The bottle is lifted and the filling is completed and the filling is completed. Filling Bottom Bottle The lifting mechanism leaves the filling valve and the bottle enters the capping machine through the bottle dial wheel. The rotary knife on the capping machine stays the neck and keeps the bottle upright And prevent rotation. The capping head is kept on the capping machine and is rotated and rotated to achieve the cover, cover, and capping action under the action of the cam to complete the entire capping process. The vial is conveyed from the capping machine to the bottle conveying chain through the bottle ejecting wheel, and the three-in-one machine is conveyed by the conveying chain.The whole machine is enclosed by the closed window, the height of the closed window is higher than the highest point of the equipment, Leaving the appropriate channel, leaving the bottom of the closed window exhaust vents, centralized air to the air purification system.
2: Features of Carbonated Drink Filling Machine
1) Achieve the desired level of carbonation
Zhangjiagang Blissum Machinery Co., Ltd. production of "bottle-filling-capping three-in-one machine" carbonated to maintain a reasonable level, carbon dioxide content meet the requirements.
2) To ensure the correct ratio of syrup and water
I produced the "bottle-filling -capping 3-in-1 machine," the use of a filling to complete, more effective to ensure the accuracy of finished beverage syrup and control the filling height to ensure the normal ratio.
3) To maintain a reasonable and consistent filling height
I produced the "filling bottle- filling-capping three-in-one machine," the accuracy of filling height and ensure that the contents meet the required standards, will not produce leakage and explosion bottles and other phenomena.
4) The top of the container should keep the minimum amount of air
I produced the "flushing- filling-capping three-in-one machine" part of the air gap is low, fully guarantee the aroma of drinks or other components of the oxidation, resulting in product deterioration.
5) Sealed tightly and effectively
Seal is a key factor in protecting and maintaining the quality of the beverage. "Flush - Fill -Cover Trinity" Whether the crown cap or the screw cap should be tightly sealed, the gland does not cause any damage to the container, Edge quality meets the specified requirements.
6) To maintain the stability of the product
"Rinsing- filling -capping three-in-one machine" to ensure product stability, open the lid will not spew and bubble spill phenomenon.
7) Cold filling technology
I produced the "bottle filling capping three-in-one machine" using cold water filling technology.
Carbon dioxide beverage products caused by unstable factors are: excessive carbonation, the presence of impurities, the presence of air, filling temperature is too high or large temperature difference. Any carbonated beverage is unstable (supersaturated) at atmospheric pressure, and this instability increases with increasing carbonation and temperature, so cold bottles (containers), cold syrups, cold water (cold drinks) pairs Filling is extremely advantageous.
|Suitable to Bottle Shape||Round and Square container Bottle diameter:50-120mm Bottle Height:160-320mm|